Search

SearchSearch
Need help with an alternative? Contact an expert
Back to overview

KINS' BLUE HT Pro

Ultimate solution for tube cutting performance

Unlock the full potential of your tube cutting operations with the KINS’ BLUE HT Pro saw blade. With cutting speeds up to 300 m/min at very high feed rates, the PVD coated carbide tipped KINS’ BLUE HT Pro is your optimal solution for high volume and high tensile tube applications.

It has specifically been designed for cutting all types of high tensile tubes with a high output and will perform at its best at tensile strengths between 1,000 – 1,800 N/mm2 at a wide range of demanding tube applications and steel grades. Typical products are drive shafts, twist beams, camshafts, suspensions and differentials.

Read more Show less

  • Low/Med. Tensile

  • High Tensile

  • Blade Life

  • Tube

  • Thin Tube

Get your bladeGet your blade
Get your bladeGet your blade

Advantages of KINS’ BLUE HT Pro saw blades

  • Suitable for all types of high-tensile tubes
  • Specifically designed for cutting high tensile tubes with a high output
  • Higher blade life, especially when cutting higher tensile strength tubes
  • Very high feed rates
  • Because the cut surface is as close to the end stage as possible, you will minimize or avoid post-machining, save cycle time and tool costs

ACHIEVE A FLAWLESS SURFACE FINISH

It has specifically been designed for cutting all types of high tensile tubes with a high output and will perform at its best at tensile strengths between 1,000 – 1,800 N/mm2 at a wide range of demanding tube applications and steel grades. Typical products are drive shafts, twist beams, camshafts, suspensions and differentials.

Achieve an almost flawless surface finish that meets the highest standards of your industry and minimize or avoid post-machining, by saving cycle time and tool costs.

Applications for KINS’ BLUE HT Pro

  • Cutting high tensile tubes with high output (best performing between 1,000 – 1,800 N/mm2)
  • Cutting speeds up to 300 m/min
  • Tooth load ranging from: 0.035 – 0.20 mm/tooth
  • When focussing on output, using high parameters is advised.
  • When focussing on blade life, using regular parameters is advised

Applications for KINS’ BLUE HT Pro include:

  • Seating components, headrests
  • Sleeves, bushings
  • Drive shafts, side shafts, half shafts
  • Twistbeam
  • Chassis / body structures, stabilizer bars, instrumental panel beams
  • Camshafts,
  • Suspensions, shock absorber parts
  • Steering mechanics
  • Fittings, couplings
  • Differentials

Typical steel grades for KINS’ BLUE HT Pro

  • Carbon steel (E355 +C)
  • High Carbon, high tensile
  • ‘Sticky’ materials
  • High Strength Low Alloy (HSLA)
  • Advanced High Strength Steel (AHSS)
  • Manganese (Mn) alloyed
  • Boron (B) alloyed
  • Docol Dual Phase
  • XPF grades
  • Specifically: 22MnB5 / 26MnB5 / 27MnB5, 34CrMo4 / 34CrMo4-HC / 34CrMo4-LC / 34MnB5, MW1000L / MW700L

Worldwide network

Find your distributorGet your saw blades

TYPICAL MACHINES

Manufacturer Machine type
Rattunde ACS series
RSA Rasacut
Sinico Top
Bewo DCH / SCF (single/double)
Soco SA Series
Adige / BLM TS/CM series

STANDARD Range KINS’ BLUE HT Pro

Diameter (mm) Kerf (mm) Bore hole (mm) Pinholes No. of teeth (Z)
315 2,3 / 2,0 32 4 / 9 / 50 / 4 / 12 / 64 100
315 2,3 / 2,0 32 4 / 9 / 50 / 4 / 12 / 64 120
315 2,3 / 2,0 40 4 / 9 / 50 / 4 / 12 / 64 100
315 2,3 / 2,0 40 2 / 9 / 55 / 4 / 12 / 64 120
350 2,7 / 2,5 50 4 / 16 / 80 100
350 2,7 / 2,5 50 4 / 16 / 80 120
350 2,7 / 2,5 50 4 / 16 / 80 140

KINS' BLUE HT Pro is a new saw blade

Discover other products

KINS' BLUE LMT

  • Low/Med. Tensile

  • High Tensile

  • Blade Life

  • Tube

  • Thin Tube

KINS' BLUE Stainless

  • Low/Med. Tensile

  • High Tensile

  • Stainless Steel

  • Blade Life

KINS' BLUE Multi

  • Low/Med. Tensile

  • High Tensile

  • Stainless Steel

  • Multi Tube

  • Thick Tube
Need help with selecting a blade? Try our blade selector

KINS' BLUE LMT Performance

  • Low/Med. Tensile

  • High Tensile

  • Blade Life

  • Tube

  • Thin Tube

KINS' BLUE HT

  • Low/Med. Tensile

  • High Tensile

  • Blade Life

  • Tube

  • Thin Tube

KINS' BLUE HT Stabilizer

  • Low/Medium Tensile

  • High Tensile

  • Blade Life

  • Tube

  • Thin Tube