KINS' ORANGE OrbitalMaster

Orbital flying cut-off on tube mills

KINS' ORANGE OrbitalMaster TCT saw blades are setting new standards in orbital flying cut-off on tube mills. With its unique combination of fracture-resistant carbide tips, protected by a cutting-edge PVD coating, KINS’ ORANGE OrbitalMaster empowers a high blade life and high line speeds.

Read more Show less
  • Carbon Steel

  • Stainless Steel

  • Scarf

  • Blade Life

Innovative tooth geometry for orbital cutting

Featuring a light cutting geometry and smooth chip evacuation, it achieves a milled-like surface finish. This innovative tooth geometry also minimizes vibrations by ensuring excellent blade life, especially when cutting thin-walled tubes (< 4mm).

Ensure high line speed

KINS’ ORANGE OrbitalMaster has proven itself thoroughly across a wide range of applications. A robust product that has demonstrated its effectiveness under the most challenging conditions. This translates to an extended blade life, a consistent performance, high line speeds and cuts. Perfect for orbital cutting of large sizes of all shapes in combination of all wall-thicknesses (up to S700 X80, HT) and tubes.

With suggested cutting speeds of 280-400 m/min and a tooth load of 0.04 - 0.16 mm/tooth the KINS' ORANGE OrbitalMaster allows exploiting the capabilities of all makes of orbital cutoff-machines.,

PARAMETER EXAMPLE Orbital cutting

  • Tube-entry 0.03 up to 0.06 mm/tooth
  • Orbitalfeed:2 0.10-up to 0.30 mm/tooth

Advantages of the KINS’ ORANGE OrbitalMaster

  • Short cuttime
  • High blade life
  • Cuts high tensile materials (up to S700MC, S355J2H, X80)
  • Milled like cut surface

APPLICATIONS For KINS’ ORANGE ORBITALMASTER

Perfect for large sizes of all shapes in combination of all wall-thicknesses (up to X80, HT) and tubes with suggested cutting speeds of 280-400 m/min and a tooth load ranging from 0.04 - 0.16 mm/tooth. Optimal for a range of cutting applications including pipes and tubes, structural tubes, and foundation pipes.

  • Orbital, flying-cut-off applications
  • Suggested cutting speed: 280 – 400 m/min
  • Tooth load ranging from: 0.04 - 0.16 mm/tooth
  • KINS’ ORANGE OrbitalMaster saw blades are available for all types of orbital cutting machines, such as ADDA-FER, ASMAG-SEUTHE, CONTOR, Danieli, Danobat, Elmaksan, ERWT, Fimi, FIves OTO, Kusakabe, Linsinger, MTM, Nakata, Olimpia80, and SMS Meer.

TYPICAL STEEL GRADES FOR KINS’ ORANGE ORBITALMaster

  • Low carbon steel
  • High carbon steel
  • Boron steel
  • Low-alloy high-strength steel

TYPICAL MACHINES

Manufacturer Machine type
Fives OTO Mills TOAC series
Nakata RFS series
Kusakabe RD series
Linsinger MC series
SMS Meer PTO, PTA
Elmaksan ELBM series
Danieli DP0 series
Adda Fer FIMI Group DB series
MTM A206, A208

STANDARD Range KINS’ ORANGE OrbitalMaster

Diameter (mm) Kerf (mm) No. of teeth (Z)
300 4,3 / 3,7 / 3,2 44 / 52 / 72
320 1,3 / 3,7 / 3,2 44 / 60 / 80
350 4,3 / 3,7 / 3,2 / 3,2  52 / 64 / 72 / 84
355 4,3 / 3,7 / 3,2 / 3,2 52 / 64 / 72 / 84
380 4,2 / 3,7 / 3,2 54 / 66 / 90
400 4,3 / 3,7 / 3,2 60 / 72 / 100
460 4,3 / 3,7 / 3,7 64 / 84 / 110

KINS' ORANGE OrbitalMaster is formerly known as: TubeMaster

Explore the possibilities within our wide range to optimize your sawing process

By exploring our sawing blades you can discover new ways to enhance efficiency, precision, and TCO of your sawing processes.

Read more about us