Search

SearchSearch
Need help with an alternative? Contact an expert
Back to overview

KINS' RED MT

Precision Meets Durability

Introducing the KINS’ RED MT saw blade – your cutting solution for solid carbon steel with a carbon content below 0.60% and a tensile strength ranging from 600 - 900 N/mm². Engineered for high productivity, it's the go-to saw blade when you need performance and longevity across a wide variety of materials. With suggested cutting speeds between 100 - 280 meters per minute and a tooth load varying from 0.05 - 0.10 mm/tooth for the best possible performance, the KINS’ RED MT saw blade ensures precision and efficiency with every cut.

Read more Show less

  • Low Tensile

  • Medium Tensile

  • Blade Life

  • Tight Tolerance

Get your bladeGet your blade
Get your bladeGet your blade

SUITED TO CUT A WIDE ARRAY OF MEDIUM TENSILE SOLID MATERIALS

KINS' RED MT is versatile and suited for a wide array of medium tensile solid materials, with cutting speeds within the range of 100 - 280 m/min and tooth loads of 0.05 - 0.10 mm/tooth. 

This saw blade seamlessly integrates with all renowned brands of stationary automatic sawing machines, including Nishijimax, Tsune, Mega, Everising, Rattunde, Behringer, and more. Elevate your cutting capabilities to a whole new level with KINS’ RED MT – where precision meets durability for unmatched performance.

Advantages of KINS’ RED MT

  • Engineered for precision cutting of medium tensile solid carbon steel
  • High productivity
  • Smooth cutting surface
  • Best blade life performances when a wider range of materials needs to be cut

Applications that fit KINS’ RED MT

  • Specifically designed for cutting solid carbon steel (< 0.60%)
  • Best performing at low to medium tensile strengths between 600 – 900 N/mm2
  • Suggested cutting speed: 100 – 280 m/min
  • Tooth load ranging from: 0.05 – 0.10 mm/tooth

Typical applications

  • Hydraulic cylinders
  • Bearing housing and wheels
  • Wheel hubs
  • Gear wheels
  • Mechanical parts
  • Bolts, nuts, fittings, couplings, flanges, hubs
  • Axles, drive shafts, crankshafts

Typical steel grades

  • Mechanical Engineering steel
  • Medium carbon steel
  • Low alloyed steel
  • Medium alloyed steel
  • Bearing steel

Worldwide network

Find your distributorGet your saw blades

TYPICAL MACHINES

Manufacturer Machine type

Amada

CM(B) series up to CM(B)150

Noritake

NCS-series up to NCS150

Behringer / Eisele

HCS-series up to HCS150

Mega

CS-series up to CS150

Wagner / Trennjäger

SPA-series up to SPA150

Kasto

 (vario-/grip-) speed C-series up to speed C15

Everising

P-series up to P150

Nishisimax

NHC-series up to NHC150

Ficep

S-series up to S50

Tsune

TJ/TK-series up to TJ/TK150

Exactcut

TAC series up to TAC155

Danobat / Plantool

VCS/QCS series

STANDARD RANGE KINS’ RED MT

Diameter (mm) Kerf (mm) No. of teeth (Z)
250 2,0 / 1,7 60 / 72 / 80 / 100
285 2,0 / 1,7 60 / 72 / 100 / 120
315 2,4 / 2,0  2,6 / 2,25 60
315 2,3 / 2,0  2,5 / 2,25 72 / 80
315 2,3 / 2,0 100 / 120
350 2,8 / 2,5 60
350 2,7 / 2,5 80 / 100 / 120
360 2,6 / 2,25 60
360 2,5 / 2,25 80 / 100 / 120 / 140
370 2,4 / 2,0 60
370 2,3 / 2,0 80 / 100 / 120
380 2,6 / 2,25 60
380 2,5 / 2,25 80 / 100 / 120
400 2,7 / 2,5 60 / 80 / 100
420 2,7 / 2,25 50 / 60 / 80 / 100
425 2,7 / 2,25 50 / 60 / 80 / 100
460 2,8 / 2,25 50
460 2,7 / 2,25 60 / 80 / 100 / 120
480 2,7 / 2,25 50 / 60 / 80 / 100
500 3,5 / 3,0 80
520 3,8 / 3,2 50
520 3,0 / 2,5 72 / 80
560 3,8 / 3,2 60
560 3,0 / 2,5 72 / 80
560 3,7 / 3,2 100
560 3,0 / 2,5 120
580 3,2 / 2,7 60 / 72 / 80 / 100
630 3,2 / 2,7 60 / 72 / 80 / 100
650 3,7 / 3,2 80 / 130
750 3,8 / 3,2 60 / 72 / 80 / 100

KINS' RED MT is formerly known as: CX1M

Discover other products

KINS' RED MT Performance

  • Low Tensile

  • Medium Tensile

  • Blade Life

  • Tight Tolerance

Explore the possibilities within our wide range to optimize your sawing process

By exploring our sawing blades you can discover new ways to enhance efficiency, precision, and TCO of your sawing processes.

Read more about us